1piece 1000w Wind Grid tie inverter; wind inverter +grid tie +dump load resister+LCD display; For AC Output Wind Turbine; Build In Dump Load Controller; Build In High Wind Protection; Build In LCD Display; Build In Electric Brake System; The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home.
The grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of the grid. The model of WA has build in bridge rectifier, and the model of WD has input reverse protection, All models have a high voltage protection function, when the wind is too big, the grid tie inverter will disconnect itself from the wind turbine, so it is very safe to be used.
LCD display Function: 1. Electric parameters measurement function (voltage, current and active power, electric energy). 2. Running time function (record load cumulative working hours). 3. Backlight function. 4. Power down data save function (save the number of kWh, operation time). 5. Large screen LCD display (display voltage, current, power, active power, cumulative running time).
Key Function: UP: Short press will display power, electricity, current and voltage in anti-sequence. DOWN: Short press will display power, electricity, current and voltage in sequence. BACK LIGHT: Short press will open or close backlight.
There is a Curve Adjustor on this panel, the Curve Adjustor can adjust the inverter to fit the performance of the wind generator, you can adjust the Curve Adjustor according to the rated output voltage of the wind generator to get Max. power that combined to the grid. The scale indicator around the Curve Adjustor is just a reference, you should adjust the Curve Adjustor to get max. power feed to the grid under the normal wind speed at the installed location.